This IS Good, and I Have You Guys to Thank for it!!!

Entertainment

Thanks so much for all the love and support guys!!! Grab a shirt/hoodie/patch and join the Demolitia today!!! www.bunkerbranding.com/pages/demolition-ranch
I get lots of comments asking about my equipment, here is what I use to make my videos!
Main Camera amzn.to/3cTN8qf
Secondary Camera amzn.to/30qx5vb
Drones amzn.to/2Sf0oMF amzn.to/3kWYXyG
Music:
usplan.info/two/video/tX96toCpqovDjWc.html

Comments

  • Peyton Massie
    Peyton Massie6 days ago

    Your throttle is set high on the black one

  • Manuel Gomez
    Manuel Gomez7 days ago

    Mark messed with the gonvner on the black one could be the problem

  • Ronald Keith
    Ronald Keith8 days ago

    Trun the idel down.

  • BXS Goose
    BXS Goose17 days ago

    So on the black minibike you have a screw on the carburetor it is black and you turn that and it adjust the idle

  • Jacob Cunliffe
    Jacob Cunliffe17 days ago

    Try loosening the throttle cable

  • J Jarvis
    J Jarvis22 days ago

    Turn the idle screw on the carb

  • schnutchie
    schnutchie24 days ago

    Those "motorcycles" sure do look alot like mini-bikes.

  • Joseph Murphy
    Joseph MurphyMonth ago

    Idle screw maybe just guessing I'm not a mechanic

  • Nobody None
    Nobody NoneMonth ago

    changes to your truck? you gonna paint it pink?

  • Justin Wampler
    Justin WamplerMonth ago

    If u dont have the black bike idling right try and adjust the idle screw

  • dhananjay manchekar
    dhananjay manchekarMonth ago

    ❤❤❤☺🙂

  • glenn nikkelson
    glenn nikkelsonMonth ago

    there is a screw on he side of the out side of the carb and thats ur idel screw if u turn it that will make the revs higher or lower

  • Jerry Smith
    Jerry SmithMonth ago

    it's all in your carbs. just clean the crap out of them and enjoy. careful those mini bikes can be addictive lol I now have 5. 3 of them I built for my 5 year old daughter. i like the channel.

  • Jacob Trauernicht
    Jacob TrauernichtMonth ago

    The thing is I have many of those memories. My dad has been a volunteer fireman my entire life. I guess you could say it rubbed off on me as I joined the same department he is on this past summer when I turned of age.

  • Dylan Jarrett
    Dylan JarrettMonth ago

    My favorite part of all Matt’s vlogs is link Matt’s such a good father

  • megamind yourbuisness
    megamind yourbuisnessMonth ago

    And my dad is a Mechanic in New Jersey

  • megamind yourbuisness
    megamind yourbuisnessMonth ago

    Now you are good at fixing a motorcycle!

  • David Ball
    David BallMonth ago

    If you haven't already gotten it fixed, there's a spring loaded screw on the side of the carb to adjust the idle speed. Turn it counterclockwise to slow it down. This video will give you a basic idea usplan.info/two/video/3WVoqqSDgXuyhIw.html Just in case it doesn't have adjustable carb screws here's a video showing how to adjust the governor. usplan.info/two/video/spV_vYyDnmitpHw.html Edit: I commented before watching til the end lol

  • Da Redneck Gamer
    Da Redneck GamerMonth ago

    Love how matt compared fixing an animal to fixing a carb 😂

  • Koby Kremling
    Koby KremlingMonth ago

    It may be the valves

  • Wyatt Neel
    Wyatt NeelMonth ago

    Adjust the idle on the black one

  • Liam Wood
    Liam WoodMonth ago

    Matt needed to watch a how to clean a carb USplan video. He was one flat head away from having the jet out.

  • Dirk
    DirkMonth ago

    idle adjustment screw in the carb....? normaly there is one.....

  • Aston Zabriskie
    Aston ZabriskieMonth ago

    If you adjust the bin in the carb that might help the one that is idoling well but dies when you give it gas

  • Jon Hill
    Jon HillMonth ago

    Love the attitude here. 👍

  • Ismael White
    Ismael WhiteMonth ago

    I have my own bike exactly like both of them except it's a 2014 and it kept taking off on it own too, what you might have to do is get a new clutch, or you have to loosen it up a little bit, I have no idea what could be wrong with the other one though. Hopes this helps, if you need more information, shoot me and email at ismaelwhite773@gmail.com

  • Smiling Freak
    Smiling FreakMonth ago

    6:07 don't mean to sound like a annoying concerned parent, but you shouldn't let him sit like that, it can limit his mobility later in life like neurological damage and conditions. It's calling W sitting. W-sitting may be a sign that Lincoln is avoiding coordination or independent movement on the right and left sides of the body. Sitting in the W-position limits motion of the trunk and discourages reaching across the body. it may become harder for him to sit in a normal position after a while of sitting like that, if you notice increased muscle tone or certain neurological conditions take him to a doctor right away because it could affect him for the rest of his life. i know this is NOT what was asked for in the comment sections but please! I care about you and your family and the way he's sitting is not good for his growing health. I hope you see this comment matt because it is important! btw this is my source: www.healthline.com/health/baby/w-sitting#:~:text=W%2Dsitting%20may%20be%20a,discourages%20reaching%20across%20the%20body.

  • Drake Devlin
    Drake DevlinMonth ago

    The governor spring on the black one unscrew it a little and that will help with the high itin

  • Rick James
    Rick JamesMonth ago

    Surgery I bet is easier than tearing apart and rebuilding a carb. Could never get them back together

  • Rrandom stuff with Roran
    Rrandom stuff with RoranMonth ago

    Ther is a screw on the side of the carb

  • Rrandom stuff with Roran
    Rrandom stuff with RoranMonth ago

    There is a screw on the side of the carb

  • Jennifer Purdy-Brown
    Jennifer Purdy-BrownMonth ago

    hmmmm? prolly the secondary clutch if it has one

  • Jordan Holman
    Jordan HolmanMonth ago

    My sled had a high idle I adjusted the air screws on the sides of the carbs and put wd-40 on the throttle cable link to the carb and ya the sea foam will burn off with gas but dont pour to much in because sea foam ignites not combusts it will work just not right

  • CharlX Gagnon
    CharlX GagnonMonth ago

    Anyone know we’re I can get those motorcycle in Canada

  • Destin Rabon
    Destin RabonMonth ago

    im og it fills good

  • Colum MacNally
    Colum MacNallyMonth ago

    It might be the idles to high there's a screw on the carb to turn it down

  • Mike Fritze
    Mike FritzeMonth ago

    Brother I know United Rentals are cheaper but with Cat Rentals you get better service

  • Mike Fritze
    Mike FritzeMonth ago

    Check the air filter and make sure it’s not clogged

  • Mike Fritze
    Mike FritzeMonth ago

    Turn the idle down just a bit

  • Mike Fritze
    Mike FritzeMonth ago

    It will run through

  • Russell Stafford
    Russell StaffordMonth ago

    Great song choice!

  • liam berry
    liam berryMonth ago

    hey matt try and change your throttle cable

  • Wayne Corbin
    Wayne CorbinMonth ago

    Oh and the smoke will go away just ride it twice a month and if it has a gas shut off which it should turn it off every time you store the bike if it's going to be stored for a long time just put fuel stabilizer in it or drain the gas I'm sure you know a lot of these things just giving helpful advice I've had to tear apart quite a few carburetors if not fun to have to do every year after storage

  • Wayne Corbin
    Wayne CorbinMonth ago

    Main jet and pilot jet lol

  • Wayne Corbin
    Wayne CorbinMonth ago

    Just make sure you put the float back together the right way LOL

  • Brendan Maurice
    Brendan MauriceMonth ago

    Yo it’s ur idle screw for ur air and fuel mixture same as dirt bikes u need to adjust ur idle screw

  • Caleb Young
    Caleb YoungMonth ago

    Turn the idle down on the black bike

  • Mr.BUBBLES
    Mr.BUBBLESMonth ago

    All he has to do it turn the idle down with the screw by the throttle cable in the back

  • Arvid Broms
    Arvid BromsMonth ago

    Didnt donut or whistlindiesel made that bike go faster all the others when you raced then? And just tighted the gas wire or somethin?

  • Brett Prescott
    Brett PrescottMonth ago

    Its not the governor all that does is bog your engine down when it gets to a certain rpm to keep you from blowing your engine up.good luck its the air fuel mixture screw its very visible you can see it and adjust it without taking the carb off. And make sure the idle jet and main jet are not switched same thing could happen. Idle jet is the smallest jet and goes in the short port and the main jet goes in the longer port.

  • Brett Prescott
    Brett PrescottMonth ago

    Idle air fuel mixture screw needs to be loosened while running.

  • Steven Porter
    Steven PorterMonth ago

    Try checking the head valve screw

  • Zachary Byrd
    Zachary ByrdMonth ago

    Try resetting the mixture and idle screws

  • John Martin
    John MartinMonth ago

    Adjust your air fuel mixture screws.

  • Colten Fairley
    Colten FairleyMonth ago

    Turn the idle down on the carb

  • Austin Raminsh
    Austin RaminshMonth ago

    Turn the Idle down u dumbo

  • Trevor Casselman
    Trevor CasselmanMonth ago

    Dump the tank

  • Saljaksupra
    SaljaksupraMonth ago

    There is an idle screw on the bikes you can adjust

  • Saljaksupra
    SaljaksupraMonth ago

    Try to change the air fuel mixture to make them run less boggy and make sure to turn off the gas pet cock and let them run till they die to get all the gas out of the carbs so that the gas isn’t sitting

  • Hipporosourus __
    Hipporosourus __Month ago

    Oh how I want to be that young again

  • fasfzr1
    fasfzr1Month ago

    HELL YEAH AWESOME VIDEO

  • Triston Hester
    Triston HesterMonth ago

    on the black one adjust the governer on the carb

  • Colton Moore
    Colton MooreMonth ago

    Get on amazon I always get free weed eaters and type in the engine model on amazon and they sell new carbs and fuel lines and filters everything for a tune up and its like $15

  • Jovany Rodriguez
    Jovany RodriguezMonth ago

    You can ajust the throttle cable or the carb

  • David Vazquez
    David VazquezMonth ago

    Hey Matt I love to watch your episodes from demolition Ranch to off the ranch I’m a big fan! I never put comments up on anyone’s channel. (Other then my sons channel.) But the reason why I’m reaching out is because I know your a big family man and you love your kids dearly!!! Anyways my son has a USplan channel that’s called Freddo360 PreachedToast75 he posts about short clips what I call cartoons of FANF characters. They’re amazing to me and our family. And he wants to be able to share his video as to the world! But I’m unsure how or who to send this to.? And just unsure how to get him out there. He has some followers and people that have subscription on his channel. But we are sure people would love to see his videos. We would like to ask you if you could help up us out on what we could possibly do or if you could help. I’m sure you hear this a lot since you’ve have become very successful on USplan. He also does other types of video on videos games he plays. My son is Autistic but he doesn’t want that to define him. He says he wants to be recognized as a USplanr and a CEO of his own business! Please help if you can! Happy New Year! From the Vazquez family! I hope you see this! Great job on the bike work!

  • Michael Perry
    Michael PerryMonth ago

    the green one needs the air fuel mix ajusted and the black one needs the idel turned down witch is one the carb good luck

  • NY Dairy Farmer 05
    NY Dairy Farmer 05Month ago

    Did you adjust the choke

  • Ken Willis
    Ken WillisMonth ago

    Amazon can get you a replacement carb for lee than 20 dollars

  • misty azbell
    misty azbellMonth ago

    Check your throttle cable

  • misty azbell
    misty azbellMonth ago

    Take a copper speaker wire and run it thru the jet

  • YYFREAK
    YYFREAKMonth ago

    It really bothers me how you keep calling it a motorcycle

  • Zachary Moore
    Zachary MooreMonth ago

    Try and adjust the air flow and gas flow on the carb

  • ZeRoOO _2018
    ZeRoOO _2018Month ago

    Need to adjust the carbs

  • southsidemikevlogs
    southsidemikevlogsMonth ago

    how about the idle adjustment screw maybe try that maybe the screw is out of wack

  • Twins 07 adventures
    Twins 07 adventuresMonth ago

    Adjust the idle screw on the carby

  • Frankenstein's Monster
    Frankenstein's MonsterMonth ago

    Check the spark plug on the black bike it might be gunked up

  • Andrew Dawson
    Andrew DawsonMonth ago

    He will grow up to be a great kid. My dad would have been pist and screaming about me making a mud puddle if he let me spray out all the water in the tank.

  • Recon D4rk
    Recon D4rkMonth ago

    idle screw

  • Bigg Chief
    Bigg ChiefMonth ago

    Double check your throttle cable make sure it isn't getting stuck or that it isn't frayed at all. Also I had a mini bike like that and the twist handle throttle always had problems with disengaging fully. Just something to keep an eye on especially since it's been sitting around. Nvm just seen the end of the video lol

  • The Thug pug
    The Thug pugMonth ago

    i recomed walthing a few videos on how to ajust the carbs it will help and make shure to use nonethanol.

  • William Bargas
    William BargasMonth ago

    Idle screw just give it a small twist and it won't take of

  • The Thug pug
    The Thug pugMonth ago

    that is just like the carb on my Baja mini bike

  • Hunter rich
    Hunter richMonth ago

    Adjust the throttle

  • a random person
    a random personMonth ago

    Maybe ur throttle for the black one is sticky, take it apart and lube it up, u don't want it to be like my LT80, u give it full throttle and it activates "cruise control" then u try to jump on after starting it then it tries dragging u into the woods

  • Ruan Luus
    Ruan LuusMonth ago

    Hey matt on the carb theres a jet that can be screwed in and out that determine the idling

  • chasyn oden
    chasyn odenMonth ago

    It’s the idler my dad is a mechanic

  • Harry Johnson017
    Harry Johnson017Month ago

    Rebuild the top end sounds like a worn out set of rings and that you're burning oil

  • Luke Baxter
    Luke BaxterMonth ago

    What’s up Matt! Quick question, what kind of editing equipment do you use

  • Yung Trisquit
    Yung TrisquitMonth ago

    is t there a screw for idle adjustment? i think when i built my go cart me and the homie cranked it all the way down to make it go faster. we would have to start the go cart on jack stands cause the wheels would start turning when we turned it on

  • Nathan Harris
    Nathan HarrisMonth ago

    It is idling high because the governor try messing with the governor on the engine

  • vivian williams
    vivian williamsMonth ago

    You are the man ! Awesome job fixing the bikes ! 😊👍💕💕💕

  • Zeppelin Robinson
    Zeppelin RobinsonMonth ago

    It the idle screw

  • David lumpkins
    David lumpkinsMonth ago

    Could be an i

  • David lumpkins

    David lumpkins

    Month ago

    Idle screw to adjust

  • David Rozell
    David RozellMonth ago

    why aren`t you and link wearing your seat belts?

  • Ram Diesel
    Ram DieselMonth ago

    Check the throttle position wire and screw

  • Jennifer Lee
    Jennifer LeeMonth ago

    There is a idle screw on the side of the carburetor that will make it idle lower

  • Jimmie Ackley
    Jimmie AckleyMonth ago

    Black one may need to adjust idle air screw

  • Chase Cole
    Chase ColeMonth ago

    My go kart I have which is a 212cc manco engine did the same thing your black motorcycle is doing taking off when giving it gas it was a bolt in the engine issue

  • 50Sixx
    50SixxMonth ago

    What kind of bikes are those?

  • Darrin Dunn
    Darrin DunnMonth ago

    Matt needs to meet Mustie1. 👍🇺🇸❤😉 Mustie1 can make anything run.

Next